APPLICATION

Built with a medical grade silicone core and encapsulated isopropyl based cap plastic, our prosthetic units facilitate perfect edge fusion and hyper-realistic skin integration for complex cinematic field deployments.

Here is a step by step guide to apply our prosthetics:

FILE_LOG.001

USING A MAKEUP WIPE OR MAKEUP REMOVER AND COTTON PAD, CLEAN THE AREA YOU WANT TO APPLY THE PROSTHETIC.

ENSURE THE AREA IS THEN DRY BEFORE PROCEEDING

PREPARE THE SKIN

FILE_LOG.002

POSITIONING

PLACE THE PROSTHETIC ON THE SKIN TO CHECK THE POSITIONING.

YOU CAN USE A WHITE MAKEUP PENCIL TO MARK THE OUTLINE IF THIS HELPS.

FILE_LOG.003

ADHESION PART 1

STARTING FROM THE CENTRE OF THE PROSTHETIC, APPLY A THIN LAYER OF ADHESIVE, WAIT FOR IT TO BECOME TACKY.

(TACKINESS CAN BE CHECKED BY LIGHTLY TAPPING IT WITH A CLEAN FINGER)

ONCE TACKY APPLY THE PROSTHETIC TO THE SKIN.

FILE_LOG.004

ADHESION PART 2

WORKING AROUND THE PROSTHETIC, LIFT DIFFERENT AREAS, APPLY ADHESIVE, WAIT FOR IT TO BECOME TACKY AND LAY IT DOWN ONTO THE SKIN.

CONTINUE AROUND THE PROSTHETIC UNTIL EVERYTHING IS LAID FLAT TO THE SKIN.

FILE_LOG.005

ENSURE ALL THE EDGES OF THE PROSTHETIC ARE LED FLAT AGAINST THE SKIN.

IF ANY ARE LIFTED, REPEAT STEP 4 UNTIL EVERYTHING IS LED FLAT.

CHECK THE EDGES

FILE_LOG.006

DISSOLVING

SKIP THIS STEP IF YOU DO NOT HAVE AN ENCAPSULATED EDGE TO YOUR PROSTHETIC.

USING ISOPROPYL ALCOHOL, DISSOLVE THE EDGES OF THE PROSTHETIC, YOU SHOULD NOTICE THAT THE PLASTIC EDGES DISSOLVE INTO THE SKIN, CREATING A SEAMLESS EDGE.

PLEASE USE 99% ALCOHOL FOR THIS STEP.

FILE_LOG.007

APPLY MAKEUP

ONCE THE PROSTHETIC IS APPLIED, USE MAKEUP AND FAKE BLOOD TO ADD DETAILS FOR REALISM.

PLEASE NOTE, THAT DUE TO THE ENCAPSULATION IS ALCOHOL BASED, ALCOHOL BASED FACE PAINTS CANNOT BE USED AS THEY WILL DISSOLVE THE CAP PLASTIC FURTHER. THIS IS NOT APPLICABLE TO UN-ENCAPSULATED PROSTHETICS.

FILE_LOG.008

ENJOY!

TAKE LOTS OF PHOTOS AND TAG US ON OUR INSTAGRAM PAGE

@DIMPLYBEAN_OFFICIAL